Preparing The Vacuum Cleaner; Assembling The Vacuum Cleaner - Westinghouse WHVC01SB Instruction Manual

PREPARING THE VACUUM CLEANER

1. Carefully unpack your vacuum cleaner.
2. Remove packaging around the vacuum cleaner, power cord and A/C plug.
Do not remove warning labels.
3. Lay all components out on the floor ready for assembly.

ASSEMBLING THE VACUUM CLEANER

1. Fit the hose to the vacuum cleaner by inserting
the rotating hose connection into the vacuum
cleaner until you hear a click. To remove the
hose, press the buttons at the side of the hose
connection and pull with an outward motion.
2. Assemble the extension tube and accessories:
i) Fit the telescopic tube onto the end of the hose.
ii) Fit the floor brush onto the telescope tube.
3. Extend a sufficient length of electric flexible power
cable and plug into the mains socket. The yellow
mark on the electric flex cable is the maximum
length that must not be exceeded.
4. Your vacuum cleaner is now ready for use.
© 2020 RVM Australia Pty Ltd. All Rights Reserved
5