Attach the mini stereo jack marked “ PC Audio ” to your computer’s earphone jack Touchscreen Installation ( 1020TSV / 1022TSV / 1020TSH /1022TSH Only ) Please download and install the Touchscreen driver for your operating system from our website WWW.XENARC.COM.
Page 6
│ Quick - Start Attach the USB plug to your USB connector Depending on your application, you can choose to install the included U-Shape bracket onto the monitor Please make sure that you install the plastic and metal washer as shown if you choose to use the U-Shape bracket.
Remote Control │ 1. Power Button : Turn the monitor ON or OFF. 2. Mirror Button : Enable or Disable the reverse of the display. 3. Dimmer Button : Dim the brightness of the display by pressing this key continuously to set the brightness level of the display. ( Only available when auto sensor is disabled.
Page 8
│ Remote Control Instructions for remote controller shortcuts 1. Dimmer ( Adjust the brightness ) By pressing the Dimmer button, it will adjust the brightness level from 0, 20, 40, 60, 80 and 100. Default is 100 ( Only available when smart light sensor is disabled ) 2.
Page 9
Remote Control │ 6. Mirror ( Image upside down ) Enable or Disable the display upside down. choose the direction you wish to display. 7. Mute Mute the speaker. Press again to restore the sound of the speaker. 8. Display ( Display mode ) Display the current input signal on the screen.
│ Hardware Installation Buttons description: Power Button : Press to turn ON or OFF the monitor. Select Button : Press to select the input signal to display. Press the left ( ◄ ) or right ( ► ) to highlight the input source desired and then wait 2 seconds to make the selection.
Page 11
Hardware Installation │ 1. PICTURE • Picture Mode : Set the color mode to the desired setting : Standard, Mild User, Dynamic. • Backlight : Adjust backlight intensity by pressing Left ( ◄ ) or Right ( ► ) buttons. Increase the number for a higher level of backlight output. Decrease the number for a lower level of backlight output.
Page 12
12│ Hardware Installation 3. ADJUST • Source Info : Display the source of input signal. If it is ON. • Resolution Info : Select to turn OFF or turn ON displaying of On Screen Source Information. • Source Enable : Select to enable or disable the input signal. If an input signal is turned off, the source will automatically be disabled.
Page 13
Hardware Installation │ • Touch Panel : Not available. • Charger Icon : Not available. • Key LED BackLight : Adjust the backlight brightness of the buttons. • OPS Power Press : Not available. 5. FUNCTION • CCD FIRST : Set whether to have monitor switch to CCD signal automatically if a signal is present.
For Technical Support , please contact us at: Xenarc Technologies Corp. Toll Free : 888 - 656 - 6536 E - Mail : support @ xenarc.com Website : www.xenarc.com The length of the mouting screw. 【 M4 x 6 mm (max) 】...
Owner’s Record │15 Owner’s Record The model and serial number are located on the rear of the unit. Please record these numbers in the spaces provided below, as well as the dealer name, address, and telephone number. Please refer to these records whenever speaking to your dealer regarding this product.