Checking The Brake And Clutch Fluid Levels - Yamaha FJR1300AT(C) Owner's Manual

indicator groove has almost disap-
peared, have a Yamaha dealer replace
the brake pads as a set.
Rear brake pads
1. Lining thickness
Check each rear brake pad for damage
and measure the lining thickness. If a
brake pad is damaged or if the lining
thickness is less than 0.8 mm (0.03 in),
have a Yamaha dealer replace the
brake pads as a set.
PERIODIC MAINTENANCE AND MINOR REPAIR
Checking the brake and clutch
fluid levels
Front brake
EAU22500
1. Minimum level mark
Rear brake
1. Minimum level mark
EAU22680 Clutch
1. Minimum level mark
Insufficient brake fluid may allow air to
enter the brake or clutch systems, pos-
sibly causing them to become ineffec-
tive.
Before riding, check that the brake fluid
is above the minimum level mark and
replenish if necessary. A low brake fluid
level may indicate worn brake pads
and/or brake system leakage. If the
brake level is low, be sure to check the
brake pads for wear and the brake sys-
tem for leakage.
NOTE:
The rear brake fluid reservoir is located
behind panel F. (See page 6-8.)
Observe these precautions:
6-24
6