Advertisement
Available languages
Available languages
Operating instructions
LED strips complete set with USB-connection
Item no. 1493869
Intended use
This LED strip and remote control set is intended for use as a background decoration
(e.g. for a TV set). Power is supplied via USB port with an 5 V/DC output (power adapter
not included). With the provided remote control you can choose your preferred colour setting
and dim level. The product can be fastened on a suitable surface, such as a wall, using the
adhesive tape located on the bottom side of the LED strip.
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use
the product for purposes other than those described above, the product may be damaged. In
addition, improper use can cause hazards such as short circuit or fire. Read the instructions
carefully and keep them. Make this product available to third parties only together with its
operating instructions.
This product complies with the statutory national and European requirements. All company
names and product names are trademarks of their respective owners. All rights reserved.
Delivery content
• 3x LED strips
• Remote control (incl. CR2025 battery)
• USB cable with control unit and IR receiver
• 3x connection cables
• 6x 4 pin connectors
• Operating instructions
Latest operating instructions
Download the latest operating instructions via the link www.conrad.com/downloads or scan the
QR code shown. Follow the instructions on the website.
Explanation of symbols
An exclamation mark in a triangle indicates important instructions in this operating
manual that absolutely have to be observed.
The arrow symbol indicates specific tips and advice on operation.
The product must only be used in dry, enclosed indoor areas. The product must not
become damp or wet.
The device is constructed according to protection class III. Protection class III
includes electrical devices with a low voltage power supply (< 50 Volts) using a
safety transformer or batteries/rechargeable batteries/solar power etc.
This symbol reminds you to read the operating instructions included with the
product.
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information
on proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the warranty/
guarantee.
a) General
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. This may become
dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high
humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of operation and
protect it from any accidental use. Safe operation can no longer be guaranteed
if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height
can damage the product.
• Before installing the product disconnect it from the power supply.
• Do not hang any objects on the strip, even if it is only decoration. Do not cover
the light.
• Do not use this product in hospitals or medical facilities. Although the radio signals
emitted by the remote control are quite weak, they might cause functional impairment
of life-support systems nearby. The same could also apply to other facilities.
• In rare cases, light impulses can cause epileptic phenomena. If dizziness, muscle
twitching and/or loss of perception occurs, consult a doctor immediately.
• The LEDs of the strips are not replaceable.
• Attention, LED light:
- Do not look directly into the LED light!
- Do not look into the beam directly or with optical instruments!
• This product is classified as protection class III and therefore operates with a
completely safe voltage range. It should only be supplied with a safety extra low
voltage corresponding to the marking on the rating label.
• Do not connect the product to another similar item(s).
• The LED strip is not designed for use with an alternating current (transformers).
This may destroy the product!
• Never pour any liquids over electrical products or put objects filled with liquid right
next to the product. If liquid or an object does enter the interior of the product,
power down the respective socket (e.g. switch off circuit breaker) and then unplug
the mains plug. Discontinue use and take the product to a specialist repair centre.
• Never use the product immediately after it has been brought from a cold room into
a warm one. The condensation generated could destroy the product. The power
adapter may also generate a fatal electric shock! Allow the product to reach room
temperature before connecting it to an appliance. This may take several hours.
• When setting up the product, ensure that the cable is not pinched, kinked or
damaged by sharp edges.
• Always lay cables so that nobody can trip over or become entangled in them, as
this poses a risk of injury.
• Consult an expert when in doubt about operation, safety or connection of the
device.
• Maintenance, modifications and repairs are to be performed exclusively by an
expert or at a qualified shop.
• If you have questions which remain unanswered by these operating instructions,
contact our technical support service or other technical personnel.
• Do not connect this rope light to another manufacturer's product.
• Interconnection shall be made only by the use of the supplied connectors.
• Any open ends must be sealed-off before use.
• Maximum system length that may be interconnected: 1.5 m
• Maximum wattage that may be interconnected: 2.5 W
b) Batteries
• Correct polarity must be observed while inserting the battery.
• The battery should be removed from the device if it is not used for a long period of
time to avoid damage through leaking. Leaking or damaged batteries might cause
acid burns when in contact with skin, therefore use suitable protective gloves to
handle corrupted batteries.
• Batteries must be kept out of reach of children. Do not leave batteries lying
around, as there is risk, that children or pets swallow them.
• Batteries must not be dismantled, short-circuited or thrown into fire. Never
recharge non-rechargeable batteries. There is a risk of explosion!
Installation
Never fasten the product to movable objects (e.g. doors or similar).
When installing the product, make sure it does not get pinched or damaged by
sharp edges.
The product must be mounted in such a way that it is not exposed to mechanical
stress. It may not be mounted in such a way that someone can step on it; that will
damage it.
Never use wires or similarly sharp/pointed mounting materials.
Never perforate the product with nails or similar items.
If you wish to bend the product, do not exceed the maximum bending radius
of 180°.
Advertisement
