Related Manuals for Bench Dog Tools PROFENCE
Summary of Contents for Bench Dog Tools PROFENCE
- Page 1 PROFENCE ROUTER TABLE FENCE INSTRUCTIONS Effective September 2019 Review full instructions prior to use for important safety information. Always check Rockler.com to con rm that you are using the most recent version of instructions for your product.
-
Page 3: Table Of Contents
Index General Safety Warnings............2 Product Specific Warnings . -
Page 4: General Safety Warnings
This product is designed only for specific applications as defined in the instructions and should not be modified or used for any manner not described in these instructions. Use only recommended accessories. Before using the ProFence Router Table Fence: READ, UNDERSTAND and FOLLOW ALL INSTRUCTIONS AND SAFETY WARNINGS. KEEP THESE INSTRUCTIONS READILY AVAILABLE FOR FUTURE REFERENCE. -
Page 5: Product Specific Warnings
SAFETY WARNING KEY Danger indicates a hazardous situation that, if not avoided, will result in death or serious injury. Warning indicates a hazardous situation that, if not avoided, could result in death or serious injury. Caution indicates a hazardous situation that, if not avoided, may result in minor or moderate injury or property damage. - Page 6 > Always feed the workpiece against the > Do NOT attempt to use the Bench Dog rotation of the bit. A table-mounted router ProFence to joint board edges that are spins the bit counterclockwise, so feed thicker than 1 ⁄...
-
Page 7: Parts List
PARTS LIST Quantity 1 Aluminum Fence 2 MDF Adjustable Fence Face 3 Bit Safety Guard 4 Dust Port 5 3/8"-16 T-Knob 6 5/16"-18 x 1 ⁄ " T-Bolt 7 1" Round Knob 8 Knob Spacer 9 3/8"-16 x 2 ⁄ "... -
Page 8: Assembly
(whichever is highest) to prevent the bit from cutting The Bench Dog into the Safety Bit Guard. ProFence Adapter Kit (27911, sold separately) is required if installing on the When adjusting the position of the Router Rockler HPL Router Tabletop (46924).. -
Page 9: Adjusting The Fence Faces
6. For each routing operation, adjust the If a zero clearance setting is necessary, various parts of the Router Table Fence follow these steps: as needed and the lock them in position by tightening all knobs before proceeding. Turn off and unplug your router before installing or adjusting Adjusting the Fence Face the bit or adjusting the Router... -
Page 10: Using The Jointing Bars
> Do NOT attempt to use the Bench fence instead of forward and away Dog ProFence to joint board edges from it. that are thicker than 1 ⁄... - Page 11 The Bench Dog ProFence 5. Remove the straightedge. From the has integral slots to accept the included aluminum Jointer Bars (12).
- Page 12 27279 Distributed by Rockler Companies, Inc. 1-800-279-4441 Rev 09/19 4365 Willow Dr. Medina, MN 55340 www.rockler.com...
Need help?
Do you have a question about the PROFENCE and is the answer not in the manual?
Questions and answers