Connection - Yamaha UX96 Owner's Manual

Connection

This chapter explains how to connect MIDI devices, such as a tone generator and
a MIDI keyboard, to the UX96.
1. Connecting a computer
Connect the USB terminal of a computer to the USB terminal of the UX96
using a USB cable. At this time, you do not have to turn off the power to the
computer.
Computer
See page 10 for information
on installing the driver.
2. Connecting the TO TG/INST terminal to a MIDI device
Connect the TO HOST terminal of a MIDI device to the TO TG/INST terminal
of the UX96 using an optional serial cable (8-pin Macintosh peripheral cable).
At this time, set the HOST SELECT switch of the MIDI device to "PC-1" or
"Mac," regardless of the computer you are using.
When you are using the TO TG/INST terminal, you can use five MIDI OUT
ports and one MIDI IN port to control the connected MIDI device.
UX96
Serial cable
3. Connecting the MIDI terminals to a MIDI device
Use optional MIDI cables to connect the MIDI IN terminal of the MIDI device
to the MIDI OUT terminal of the UX96. Also, connect the MIDI OUT terminal
of the MIDI device to the MIDI IN terminal of the UX96. At this time, set the
HOST SELECT switch of the MIDI device to "MIDI."
USB cable
Set the HOST SELECT
switch of the MIDI
device to "PC-1" or
"Mac."
MIDI device
UX96
9