Yamaha YPT-410 Owner's Manual page 54

Record Your Own Performance
If you press the [INTRO/ENDING/rit.] button while recording the style
track an appropriate ending pattern will play and then recording will
stop. When recording stops the current measure number will return to
001 and the recorded track numbers in the display will light.
● To Record Other Tracks
Repeat steps 2 through 4 to record any of the remaining tracks.
By selecting an unrecorded track—SONG MEMORY buttons [1]–[5],
[A]—you can record the new track while listening to previously recorded
tracks (the playback tracks will appear in the display). You can also mute
previously recorded tracks (the muted tracks will not appear in the display)
while recording new tracks.
● To Re-record a Track
Simple select the track you want to re-record for recording in the normal
way.
The new material will overwrite the previous data.
5
When the recording is done ...
◆ To Play Back a User Song
User songs are played back in the same way as regular songs (page 39).
1 Press the [SONG] button.
2 The current song number/name will be displayed—use the dial
to select the user song (031–035) you want to play.
3 Press the [START/STOP] button to start playback.
● Data Recording Limitations
• The split voice cannot be recorded.
• The following data are recorded at the beginning of the track. Changes
made during the song will not be recorded.
reverb type, chorus type, time signature, style number, style volume,
tempo
54
YPT-410 Owner's Manual