Important advice for assembly, maintenance and safe use
1.
Toys must be assembled by an adult before use exactly in accordance with the instructions
2.
Check all parts are present before you start to assemble the product
3.
Place small parts on a tray or similar, to ensure they are not lost
4.
If any parts are missing do not use the product until the replacement parts are fitted
5.
Remove all packaging before giving to your children or allowing them to play with this product
6.
Ensure your product is sited on level ground. Failure to do this may put additional stress on connections and joints
and in time could cause them to fail
7.
Ensure your product is located on a soft impact surface like grass. Never locate your product on hard surfaces like
concrete or asphalt
8.
Children must not use this product until properly installed
9.
Adult supervision is required at all times to ensure children play safely. Ensure children's clothing is appropriate for
the play activity.
10.
Equipment should be checked by an adult at the beginning of each season and at regular intervals during the
usage season to ensure it is safe
11.
Pay special attention to all connections and fastenings
12.
Parts may need to be replaced if they show signs of wear and tear. Replace any defective parts in accordance
with these instructions
13.
Any changes to this toy, e.g. changing or adding an accessory, must be done in accordance with our instructions.
Failure to do this will render your guarantee null and void and may make your product unsafe.
14.
The age recommendation for this product is clearly stated on the packaging and these instructions. Please adhere
to it at all times
15.
When you dispose of this equipment please do so responsibly
Safe play free space area
The safe play area refers to the zone extending 200cm
around the toys on all sides and 250cm above the toy.
The safe play area must be free from all obstacles.
TP300 Stable Cottage ENG IN0300 Issue A 13.12.17.indd 2
2m
2m
2
2m
2m
TP Stable Cottage
13/12/2017 15:34
Need help?
Do you have a question about the TP300 and is the answer not in the manual?
Questions and answers