Advertisement
aquarium Installation
4. Locate the metal top and place on the aquarium. See Fig.3 With a Phillips screw driver or with
your fingers tighten the three plastic screws to secure the metal top to the aquarium. Tighten
snug, but do not over tighten. With your fingers grasp the ring and lift the aquarium to see that
it is attached sufficiently.
5. You are ready to attach the aquarium to the fixture. With both hands remove the aquarium from
the plastic ring, move one hand under the aquarium as shown in Fig.4. With the other hand
navigate the Lunar light down into the hole of the metal top. See Fig.5 Attach the aquarium to the
fixture with the ring and hook. Your are now ready to enjoy.
Fig.4
Holding With Both Hands
Fig.3
Metal Top In Place
Ready to Tighten Screws
Fig.5
Attaching Aquarium and
Inserting Lunar Light
WWW.CURRENT-USA.COM
Advertisement
