Ryobi P737D Operator's Manual page 4

 Check for alignment of moving parts, binding of mov-
ing parts, breakage of parts, mounting, and any other
conditions that may affect its operation. A guard or
other part that is damaged should be properly re-
paired or replaced by an authorized service center.
Following this rule will reduce the risk of shock, fire, or
serious injury.
 Risk of bursting. Carefully monitor objects during infla-
tion.
 To reduce the risk of over inflation, use a reliable pres-
sure gauge periodically during inflation.
 Never leave the inflator unattended during inflation.
 Never block the inflating or deflating outlets while
operating.
 Do not use a battery pack that is damaged or modi-
fied. Damaged or modified batteries may exhibit unpre-
dictable behavior resulting in fire, explosion or risk of
injury.
SPECIFIC SAFETY RULES
4 — English
 Do not modify or attempt to repair a battery pack that
has been damaged.
 Do not expose a battery pack or appliance to fire or
excessive temperature. Exposure to fire or temperature
above 265°F may cause explosion.
 Follow all charging instructions and do not charge the
battery pack or appliance outside of the temperature
range specified in the instructions. Charging improperly
or at temperatures outside of the specified range may
damage the battery and increase the risk of fire.
 Have servicing performed by a qualified repair person
using only identical replacement parts. This will ensure
that the safety of the product is maintained.
 Allow pump to cool for five (5) minutes after each five
(5) minutes of continuous use. Never block the inflating
or deflating outlets while operating.
 Save these instructions. Refer to them frequently and
use them to instruct others who may use this inflator. If
you loan someone this inflator, loan them these instruc-
tions also.