Dynamic Filter - Yamaha VL1 Owner's Manual

Getting Started

Dynamic Filter

The Dynamic Filter stage is similar to the dynamic filters found in many conven-
tional synthesizers. It allows both fixed and dynamic filtering in high-pass, low-pass,
bandpass, and band elimination modes, and is effective for broad tonal control.
In
(from Harmonic
Enhancer)
The Dynamic Filter Parameter Page
The dry/wet "Balance" parameter allows delicate variations in the degree of
filtration applied. The "Cutoff Tracking" parameter selects either the "Fixed"
mode in which the cutoff frequency of the filter is fixed at the specified cutoff frequency
in Hz ("Cutoff Freq." parameter), or the "KeyTrack" mode in which the cutoff
frequency varies according to the key played. When "KeyTrack" is selected the cutoff
frequency is specified in octaves. Another important feature is "Resonance" — a
parameter that produces a variable resonant peak at the specified cutoff frequency in any
of the filter's modes.
NOTES
the Dynamic Filter parameters.
Mixing & The Modifiers
Dynamic
Filter
Refer to page 115 of the Feature Reference manual for full details on
54
Wet/Dry
Out
Balance
(to Frequency
Equalizer)