Adjusting The Click - Yamaha RY20 Owner's Manual

Set the number of measures by using the [ > ] cursor button to change the
3
focus to the "MEASURE" prompt. Change the number of measures by
rotating the Jog Dial or using the [ +1 ] and [ –1 ] buttons.
The default length is "02" measures. The range is "01" measure to "16"
measures.
NOTE
The meter and number of measures in a pattern that contains data cannot be
changed. If you try to change these values, the message "
momentarily appear on the display.

Adjusting the Click

The RY20 has a built-in click sound which sounds on each beat of the
measure to serve as a rhythmic guide when you record in Real-time
Mode. You can change both the volume and the quantization of the
click sound.
Select the Click display page by pressing the [ PAGE+ ] button until the
1
display indicates "CLICK".
PATTERN
OTHERS
HH
SD
BD
Set the volume by rotating the Jog Dial or using the [ +1 ] and [ –1 ]
2
buttons.
The default volume level is "15". The range is from "00" to "15".
NOTE
[ +1 ]
Pressing the and
PAD BANK A CHASE
QUANTIZE
LEVEL
MAIN A
[ –1 ]
buttons simultaneously resets the level to "
Recording a User Pattern
" will
NOT EMPTY
".
00
PAGE – PAGE +
47