Yamaha RY20 Owner's Manual page 25

• FILL BA - This section is used to make the transition back to the
verse/chorus section from the bridge section. When it has
completed playing, it switches to "MAIN A".
There is also a finale section:
• ENDING - As its name implies, this section ends the pattern play
when it is complete.
NOTE
When the " " section has completed, it stops the playback and sets the RY20
ENDING
back to " " to prepare for playing the next pattern.
MAIN A
You can select a section before you start playing a pattern. For example,
select the "INTRO" section of the pattern. After you have started the
pattern playing, you can select other sections.
NOTE
When you select a section other than the two transition sections, the newly selected
section will begin playing after the current section has finished playing.
Press and hold the [SECTION] button, then press the Drum Pad button for
1
the section you want to play. The appropriate Section indicator lights up,
for example, the "INTRO" indicator.
There are labels below the lower row of drum pads indicating the different
sections.
6 7
BD SD
INTRO MAIN A
Start playing the pattern by pressing the [ PLAY ] button. The green Play
2
LED will flash to the current tempo setting and the pattern will begin
playback.
The "INTRO" section plays, automatically followed by the "MAIN A" section.
Select another section. For example, select the "MAIN B" section. Press and
3
hold the [SECTION] button. Then press the [8 - SIDE STICK] drum pad button,
which corresponds to the "MAIN B" section.
8 9 10
SIDE HH
STICK PEDAL
MAIN B FILL AB
Playing the Preset Patterns
11
HH
CLOSED CRASH
FILL BA ENDING
SECTION
6
BD
INTRO
SECTION
8
SIDE
STICK
MAIN B
17