Gongtimer (Without Micro-Sd Card) - Dayasa GongTimer Manual

GongTimer (without Micro-SD card)

1. F
ITTING IN THE BATTERIES
Remove the battery cover as illustrated on page 27 and insert 4 new AA size
batteries (Mignon/LR06). All 4 batteries should be fully charged. Then close the
battery compartment again.
The usage of rechargeable batteries is possible, but not recommended.
2. S
ETTING THE SESSION
1. Press the ON/OFF button
session) appears with flashing figures. Press the + and – buttons to select the
number of minutes you wish your session to last (max. 199 minutes).
2. Press the Menu button. This icon
Press the + and – buttons to select the number of minutes you wish to set the
intervals for (max. 60). E.g. If you select 12, a single chime will sound every 12
minutes.
If you prefer to have no interval chimes during your session, select 00.
3. Press the Menu button. This icon
Press the + and – buttons to select the number (01 to 04) corresponding to the
chime you wish to hear: 01 = dorje, 02 = bell, 03 = low-pitched gong, 04 =
medium-pitched gong. A sample of each chime can be heard with each
selection.
4. Press the Menu button. This icon
Press the + and – buttons to select the number (01 to 10). A sample of the
selected volume can be heard with the chime you have just selected.
to start the timer. This icon
(intervals) appears with flashing figures.
(chimes) appears with flashing figures.
(volume) appears with flashing figures.
3
.
(duration of the