Panasonic Nanoe EH‑NA45 Manual page 24

Maintaining the nanoe™ outlet
• Use commercially available cotton swabs. (We
recommend the thin cotton swabs made for use with
babies.)
• This maintenance allows the hair dryer to sustain the
generated level of nanoe™ over a long period.
1. Dampen the end of
the cotton swab with
tap water.
2. A needle portion is
located deep within
the nanoe™ outlet.
Using the swab, rub
this portion gently
about 5 times.
Do not attempt to clean the platinum ion outlet ().
(The outlet has a structure which makes it difficult to
insert the swab.)
Doing so results in losing its ability to release
platinum ions.
24
Gently rub the tip of
the needle portion
cotton swab
nanoe™ outlet
Platinum ion outlet
Maintaining the air inlet
Wipe to clean lint, hair, or other
matter from the air inlet with a
tissue.
• Do not press or rub the air inlet
with a nail or other sharp object.
Doing so may damage the air
inlet.
Maintaining the air outlet
• The hair dryer should be plugged into the household
outlet only in case of maintenance for the air outlet.
• Use a commercially available toothbrush.
• Switch the temperature
selector to "Cool" and blow
away the dust etc. as you
scrub with the toothbrush.
• During maintenance, do not
block the air inlet with your
hands etc.
• Be careful when using the
hair dryer for the first time
after maintenance, since it
may blow out dust etc.
Scrub to remove any
dust, hair etc. blocking
the mesh.