Maintenance - Whirlpool WAP1038Q Manual

WhftJjlool
-------------- --------,
: &
Warnin g
.. _________ _
Be sure to disconnect the product from the power
socked before cleaning the product
• Do not use the detergent shown on the right.
• When using a chemical wipe, please pay attention to the
precautions for using a chemical wipe.
• Do not operate this product while the filter is dismounted. (If
dust gets into the product, ii may cause malfunctions and the
purification effect will be unable to be achieved.)
Main body
• Please use a vacuum cleaner to clean the dust in the
air inlet and outlet first.
• Finally, use a soft, dry cloth to wipe the surface of the
entire main body.
Pre-filter
• Clean surface dust with a vacuum cleaner.
• Can be soaked with clean water and then cleaned and
dried before being used.
Composite Filter
• Clean surface dust with a vacuum cleaner.
• The back does not need to be maintained.
• Cannot be washed

Maintenance

.
The power plug must be unplugged :
- - ..
Bbrush nozzle or slot nozzle
Newspapers, etc. (to
avoid dust scattered on
the ground.)
25