Yamaha PDP-400 Owner's Manual page 60

iii
MIDI Data Format/ MIDI-Datenformat/ Format des donées MIDI/Formato de datos MIDI
[Panel Data Contents]
(1) ABC ON/OFF
(2) SSP ON/OFF
(3) SSP NO.
(4) MANUAL VOICE
(5) MANUAL VOLUME
(6) RHYTHM NO.
(7) RHYTHM VARIATION
(8) TEMPO (Absolute value LSB)
(9) TEMPO (Absolute value MSB)
(10) RHYTHM VOLUME
(11) CHORD 1 VOLUME
(12) CHORD 2 VOLUME
(13) BASS VOLUME
(14) SPLIT POINT
(15) DUAL/SPLIT MODE
(16) DUAL/SPLIT VOICE
(17) DUAL/SPLIT BALANCE
(18) REVERB
(19) REVERB DEPTH
(20) FOOT SWITCH FUNCTION
(21) VOICE BANK (Upper 4 bits)
(22) INTRO
Individual Key Tuning Data Bulk Dump
Format
F0H, 43H
73H, 34H (Product ID)
06H (Bulk ID)
00H (Bulk No.)
00H, 00H, 0bH, 00H (Data Length= wxyH
88*2 bytes)
[BULK DATA] (low (A-1), high (A-1)
...low (C7), high (C7))
[CHECK SUM (1byte)]= 0-sum
• PDP-400 MIDI Format
[F0H] [43H] [73H] [34H] [xxH] [F7H]
43H= YAMAHA ID
73H
] = Product ID
34H
xxH= Substatus
xxH Information
02H Internal MIDI clock
03H External MIDI clock
13H Multi-timbre mode off
14H DOC Common Voice mode on
15H Multi-timbre mode on
18H DOC Common Voice mode
individual track reverb depth on
7nH All Note Off,
Receive Channel = n+1, Omni off
* When nn = 2, 3, 13, 14, 15, 18, or 7C,
PDP common ID (73H, 01H) is recog-
nized as well as 73H, 34H.
* All Control Change values are reset when
[13H], [14H] or [15H] is received. All
voices and other parameters are also
reset when [14H] or [15H] is received in
order to ensure the same initial settings.
• Special Messages
[F0H] [43H] [73H] [34H] [11H] [0nH]
[ccH] [vvH] [F7H]
43H= YAMAHA ID
73H
] = Product ID
34H
11H= PDP Special Control Code
0nH= Control MIDI Change
ccH= Control number
ddH= Control value
cc
08H DUAL/SPLIT
10H ABC Mode
11H Rhythm Variation 00H= Off
12H Fill In Switch
(BULK DATA)
13H Intro/Ending
14H Split
15H Rhythm Number [ddH]= Rhythm number
19H Volume
1AH Rhythm Volume [ddH]= Volume value
1BH Metronome mode 00H: Off
21H Solo Styleplay 00~17H= Style
22H Solo Styleplay 00H~3FH= Off
30H Drums Parameter Change
59H Reverb
(n= special control change number)
Control Value [dd]
00H= lower MAX
Balance
7FH= upper MAX
00H= Off
01H= ABC Single
Finger
02H= ABC Fingered
03H= Conventional
Full-Keyboard
ABC
04H= Full-Keyboard
ABC
01H= Variation number
00H= Fill to normal
Event Off event
01H= Fill to normal
On event
02H= Fill to variation
On event
03H= Fill to variation
Off event
00H= Intro mode Off
Switch Event
01H= Intro mode On
02H= Ending mode On
03H= Fill to normal
mode On
04H= Fill to variation
mode On
[ddH]= Split key
number (the highest
note in the left-hand
keyboard range)
[ddH]= Volume value
n= 2 (BASS)
4 (CHORD 1)
5 (CHORD 2)
(receive only)
01H: On
Number number
40H~7FH= On
See Drum Parameter Expanded
Format, below
00H= Off
01H= Room
02H= Hall 1
03H= Hall 2
04H= Cosmic
5AH Dual/Split mode 00H= Off
01H= Dual
02H= Split
(upper damper)
03H= Split
(lower damper)
04H= Split
(upper/lower
damper)
05H= Split & Lower
Voice Oct Up (upper
damper)
06H= Split & Lower
Voice Oct Up (lower
damper)
07H= SPLIT & Lower
Voice Oct Up (upper/
lower damper)
5CH Dual/Split Voice [ddH]= Dual/Split voice
5DH Foot Switch [ddH]= Function
Function
* When cc = 59 (Reverb), PDP common ID
(73H, 01H) is recognized in addition to
73H, 34H.
Drum Parameter Expanded Format
[F0H] [43H] [73H] [34H] [11H] [0nH]
[30H] [34H] .....[F7H]
73H, 34H: Product ID;
01H is recognized in addition to 34H.
0x30: /* Drum Parameter */ *2 Expanded
Format
* This resets all parameters when a differ-
ent drum kit is selected.
Expands Special Message 30.
• Effect Level
[F0H] [43H] [73H] [34H] [11H] [0nH]
[30H] [43H] [knH] [enH] [slH] [F7H]
11H: PDP special control code
0nH: MIDI Channel Number
* Received only on channel 15 (0EH) in
the PDP-400, affecting all tracks.
Received only on channel 10 (09H) n
the GM mode, affecting all tracks.
30H: Drums Parameter Change
43H: Effect Send Level
knH: Key Number
* Also included in the panel key code in
the DOC Common Voice mode (be-
cause conversion is not possible). In-
cluded in the GM key code in the GM
mode.
* When kn = 01 the en for all keys is set to
the default.
When kn = 02 the en for all keys is set to
s1.
enH: Effect Number
en= 5B: Reverb Depth
slH: Send Level
* This data applies a 40H offset to the
CH depth parameter of each channel of
each instrument.
number
number