Technical Description; General Information On The Electrical Connections - Waeco PerfectView CAM30 Installation And Operating Instructions Manual

CAM30_CAM40.book Seite 21 Donnerstag, 14. Januar 2010 5:32 17
PerfectView
6

Technical description

6.1 Function description
The camera, which is encased in aluminium housing, transmits image and sound to a
monitor via a cable. The built-in infrared LEDs improve night vision.
The camera consists of the following elements:
No. in
fig. 4, page 4
1
2
3
4
5
7

General information on the electrical connections

7.1 Laying cables
Note
I
As far as possible, use original openings or alternative openings for the connect-
ing cable duct, e.g. the panelling edges, ventilation grilles or blank panels. If no
openings are available, you must drill holes for the cables. Check beforehand
that there is sufficient space on the other side for the drill head to come out.
Note
I
Cables and connections which are not properly installed will cause malfunctions
or damage to components. Correct installation of cables and connections en-
sures lasting and trouble-free operation of the retrofitted components.
Caution!
a
The cables must not be exposed for long periods to solvents such as benzine,
as the solvents can damage the cable.
Description
Infrared LEDs
Microphone (nur CAM30 and CAM30C)
Sleeve
6-pin connection cable
LDR sensor
Technical description
21