Yamaha MODUS H11 Owner's Manual page 37

Yamaha power supply user manual
Hide thumbs Also See for MODUS H11:
Table of Contents

Advertisement

Operation
1
Engage the Load mode.
Make sure that the USB flash memory device containing the saved Internet set-
ting file named "config.n21" is connected to the instrument, and then simulta-
neously hold down the
L o d
CAUTION
To cancel loading, press any button (except the [PLAY/STOP] button) before
pressing the [PLAY/STOP] button in step 2.
2
Start loading.
Press the [PLAY/STOP] button.
When loading from the USB flash memory device
is completed, an "End" message will appear on
the display. Press any button to exit from this dis-
play.
Once loading is completed, you are now ready to access the Internet.
Once the instrument is successfully connected to the Internet, the channel
streamed from the Internet will be shown on the display when you select
lamp with the [BGM] button.
[INTERNET]
For instructions on streaming, see "Listening to the Songs on Internet" on
page 25.
1
2
[BGM]
button and press the
Internet Direct Connection (IDC)
[+/YES]
button.
E n d
NOTE
The load mode cannot be
engaged while song playback is
active in BGM mode.
NOTE
You can create the Internet set-
ting files (named "config.n21")
on the special Yamaha webpage.
NOTE
If loading is not successfully
completed, an "Err" message
and the error code will appear
alternately on the display.
NOTE
Error Code
You can check the description
for the error code on the
Yamaha website:
http://music.yamaha.com/idc/
NOTE
Yamaha recommends that you
back up the Internet setting files
(page 44).
H11 Owner's Manual
37

Advertisement

Table of Contents
loading

This manual is also suitable for:

H11vr

Table of Contents