Technical Specifications - Beurer EM 29 Instructions For Use Manual

10. Technical specifications

Circumference of the cuff
Type
Weight
– Device
– Device, cuff and cable
Electrode size
Parameter (500 ohm load)
Pulse length
Waveform
Voltage supply
Operating conditions
Storage
We reserve the right to make technical changes to improve and develop the product. If the device is not used
according to the instructions specified, perfect functionality cannot be guaranteed! This device complies with
European standards EN60601-1 and EN60601-1-2 and is subject to special precautionary measures with regard
to electromagnetic compatibility. Please note that portable and mobile HF communication systems may interfere
with this device. More details can be requested from the stated Customer Service address or found at the end of
the instructions for use.
This device meets the requirements of European Directive 93/42/EC for medical products, as well as those of
the Medizinproduktegesetz (German Medical Devices Act). For this device, a functional test and instruction in
accordance with Section 5 of the Medical Devices Operator Ordinance (MPBetreibV) is not required. It is also not
necessary to carry out safety checks in accordance with Section 6 of the Medical Devices Operator Ordinance
(MPBetreibV).
Approx. 25 to 70 cm
EM 29
– Approx. 90 g incl. batteries
– Approx. 210 g incl. batteries
Approx. 114 x 59 mm
Output voltage:
Output current:
Output frequency:
60 – 220 μs per phase
Symmetric, biphasic rectangular pulse
4.5 V (3 x 1.5 V AAA, type LR03)
0 °C to 40 °C, 20 to 65% relative humidity
0 °C to 55 °C, 10 to 90% relative humidity
21
max. 50 Vpp / 5.5 V rms
max. 100 mApp / 11 mArms
2 – 110 Hz