Related Manuals for Patterson Medical Sammons Preston Rolyan KINETEC Performa
Summary of Contents for Patterson Medical Sammons Preston Rolyan KINETEC Performa
- Page 1 Performa Before use, please read this document. User manual Kinetec reserves the right to effect technical modifications. 467896299-A – 04-2011 Série 1 – 2 Notice Originale...
- Page 2 User Manual Definition The KINETEC Performa is a PASSIVE Knee mobilisation device enabling the extension and flexion movement from de -3° à 130°. Indications • Knee replacement surgery. • Fractures (patellar, tibia plateau, femoral,...). • Arthrolysis • Hip surgery, including hip replacement, hip pinning, osteotomy,...). •...
- Page 3 Compliance: KINETEC Performa complies with the standards of Directive 93/42/EEC, and bears the CE mark. KINETEC Performa complies with the standards in force (IEC 601.1.2) concerning the electromagnetic compatibility of medical devices. KINETEC Performa complies with the standards of Directives Machine n°2006/42/CE. Description The KINETEC Performa machine consists of the following components: 1 •...
- Page 4 Electrical connection: SAFETY FIRST. The KINETEC Performa is type B, class I devices. Before connecting the device to the power supply, check that the mains voltage matches that shown on the identification plate (100-240 V~ 50-60Hz). Connect the power supply cable (21). IMPORTANT Check that the electrical socket is in good condition and is suitable for the splint power supply cord.
- Page 5 Setting the movement parameters Select the parameter to be set: Extension limit, flexion limit, speed, pause at the extension or flexion limit, force or timer; the setting to change will flash. Press the or + buttons to modify the setting; the new setting will flash. To confirm the new setting, press another function button or wait approximately 5 seconds for automatic confirmation.
- Page 6 Using the Plastic Comfort Case kit Specially designed to improve comfort and hygiene for the patient. The Plastic Comfort Cases come with straps to precisely and quickly adjust to the patient's leg dimensions. CLEANING To ensure optimal hygiene, clean the supports after each patient use Use a DISINFECTANT product (alcohol-free or <5% alcohol solution) in spray (plastic cases and metal components.
- Page 7 ADJUSTING FOR RIGHT OR LEFT LEG The KINETEC Performa is designed anatomically. Because of this the thigh slide (29) should always be placed on the same side as the leg to be mobilised. To change legs, proceed as follows: Withdraw the hip bar (29) from thigh support bar (B). (2). Slide the hip bar into the thigh support bar on the other side of the exerciser and attach the hip bar on the thigh support.
- Page 8 Maintenance After 2,000 hours of operation, the KINETEC Performa requires lubrication and maintenance operations (lubrication of the joints, pointer stops and ball screws). The need for maintenance is indicated by display of the message SERVICE when the system is switched on. Despite that warning, you can continue to use your KINETEC Performa by pressing START but you should contact your nearest KINETEC technician to have the maintenance operations conducted as soon as possible.
- Page 9 Technical specifications Product: Weight: 15Kg Splint dimensions: 109cm x 33cm x 33cm Angular limits: -3° to 130° Speed: from 50 to 220° per minute. Patient height: Maximum Weight: 135kg Patient sizing: 112 to 206 cm Full leg: 58 to 110 cm Tibia: 32 to 60 cm Femur: 26 to 50 cm Sound pressure: <70dB...
-
Page 10: Guidance And Manufacturer's Declaration
GUIDANCE AND MANUFACTURER’S DECLARATION Electromagnetic emissions The « KINETEC Performa » is intended for use in the electromagnetic environment specified below. The customer or the user of the « KINETEC Performa » should ensure that it is used in such an environment. Emissions test Compliance Electromagnetic environment –... - Page 11 GUIDANCE AND MANUFACTURER’S DECLARATION Electromagnetic emissions The « KINETEC Performa » is intended for use in the electromagnetic environment specified below. The customer or the user of the « KINETEC Performa » should ensure that it is used in such an environment. IEC 60601 Compliance Immunity test...