Alarm Clock Set Up; Sleep Timer Setup - Magnavox MCR41808 Owner's Manual


Keep all digital audio player and mobile phones away from FM antenna at all time to
minimize the disturbance.
Set Up
Alarm Clock
This Alarm Clock supports two alarming sound," Pre-set Alarm sound or Radio".
1. Power on the device that is on Stand-by mode, Press and hold "Alarm"
the display will blink, and alarm indication light will flash.
2. Press "Previous"
Mins. Press "alarm"
To change alarming sound, press "Previous"
change.
The display shows "bu2" as pre-set sound and "rAd" for radio. Press "alarm"
display alarm volume and press "previous"
3. On Alarm mode, press "Snooze"
sequence, 10, 20,30,40,50,60mins.
4. On clock mode, press "Snooze"
Remark:
NO brightness adjustment is allowed when the device on alarm sound mode.
Set Up
Sleep timer
You are able to choose Music Playback and Radio for sleep timer to end the working
mode.
1. Press "Sleep"
and it loops to OFF timer after 90mins.
The clock display will return 3 seconds after the sleep timer mode is OFF.
button to set HOUR and Press "next"
key to confirm and save.
to set sleep timer. The timer has pre-set for 15, 30, 60, 90mins
or "NEXT"
and 'next"
to set up pause in mins, on loop in
to check the remaining alarm time.
button,
button to adjust
buttons to
to
to adjust volume.