Clock Setup; Brightness Set Up - Magnavox MCR41808 Owner's Manual

Clock Set Up

Plug in power adapter, when the device is on for the first time, the clock shall display
12:00 and blink.

Long press the "
press "

Press "

Brightness Set Up

• When the device is on Stand-by mode, the brightness on the display can be adjusted
at three different stages.
• Press "Snooze"
Radio
There are two methods to tune radio
Method 1: AUTO Search Mode
1. Press "Play &Pause"
P03... until the search is done.
2. Press "Previous"
Method 2: Manual Radio Search
1. Press & Hold "Previous"
2. Press & hold "NEXT"
3. On Manual search mode, searching will stop on every channel is being found.

Improve radio reception

Move around the FM antenna to get the best position for reception.
" clock button when the display is on or flashing display, and
" key to set hours, press "
"again."" the clock key is set when time is stored and completed.
for auto search. All channels will be saved as P01, P02,
and "Next"
: search will be conducted downwards.
: search will be conducted upwards.
" key to set minutes.
button to tune in High, Medium and Low.
to change Channels.