Yamaha Clavinova CGP-1000 Owner's Manual page 94

Editing the Volume and Tonal Balance (MIXING CONSOLE)
Re-selecting the Effect block,
category and type
Use the [1 π† ]–[3 π† ] but-
tons. The re-selected effect con-
figuration is displayed at the
upper left side box in the display.
Effect Return Level:
Determines the level or amount
of effect applied.
This is set for all parts or chan-
nels.
94 CGP-1000 Owner's Manual
10
If you have selected one of the DSP 2–5 effect blocks in step 5:
You can edit its standard parameters as well as its variation parameter.
To select the standard type of parameters, press the [B] button. To select its
variation parameter, press the [E] button.
10
11
Select one of the parameters you want to edit by using the [4 π
[5 π † ] buttons.
π π π † † †
Available parameters differ depending on the selected Effect type.
12
Adjust the value for the selected parameter by using the [6 π
[7 π † ] buttons. If you have selected the REVERB, CHORUS or DSP1
π π † †
π †
effect block in step 5:
Adjust the Effect Return Level by pressing [8 π† ] button.
13
Press the [I] (SAVE) button to call up the display for saving your origi-
nal effect.
14
Use the [3 π † ]–[6 π
π π † †
π †
the effect.
The maximum number for effects that can be saved differs depending on the
effect block.
15
Press the [I] (SAVE) button to save the effect (page 69).
When recalling the saved effect, use the same procedure as in step 8.
11 12
† ] buttons to select the destination for saving
π † π †
π †
14
13
† ]/
π † π †
π †
† ]/
π † π †
π †
15