Language Setting; Date / Time Setting; User Id / Password Setting; Calibration - Walter SURFOX Owner's Manual

SURFOX Stainless steel passivation tester

6.2 Language setting

Select the desired language and press 4 to confirm.

6.3 Date / time setting

6.4 User id / password setting

6.5 Calibration

8
To set the language menu, from the main menu, select
SETTINGS and press 4, scroll using the arrow keys to
LANGUAGE and press 4.
The following languages are available:
English
u
French
u
German
u
To set the date and time, from the main menu, select
SETTINGS and press 4, using the arrow keys to scroll
to DATE and / or TIME and press 4. To set the value,
use the numeric keys on the keyboard and press 4 to
confirm.
NOTE: The date and time set appears in the quality
control report.
To set the User ID, from the main menu, select
SETTINGS and press 4,using the arrow keys to scroll
to USER and press 4; to set the value use the numeric
keys on the keyboard and press 4 to confirm. Then,
choose and enter password; to set the value use the
numeric keys on the keyboard and press 4 to confirm.
It is recommended, especially before a QC session,
to verify the calibration of the instrument.
To access the calibration control function, from the main
menu, select SETTINGS and press 4; scroll with the ar-
rows to the CALIBRATION selection and place the probe
on the calibration plate supplied, then press 4.
A 5 seconds calibration test will start, after which there
will be an OK message confirming proper calibration.