Network Connection Reset - Philips Roku TV User Manual

Models with a RESET button
1. Using a straightened paper clip or ball-point pen, press and hold the recessed RESET
button on the TV connector panel.
2. Continue to hold the RESET button for approximately 12 seconds.
When the reset cycle completes, the status indicator comes on dim.
3. Release the RESET button. The TV is now powered off.
4. Turn on the TV and proceed through Guided Setup. See
Models without a RESET button
1. On the TV panel (not the remote) press and hold down the MUTE and POWER
buttons.
2. Unplug the TV power, and then plug it in while continuing to hold down the MUTE and
POWER buttons.
3. When you see the startup screen appear on the TV, release the buttons.
4. Turn on the TV and proceed through Guided Setup. See

Network connection reset

If you want to remove your network connection information without disturbing other
settings, navigate from the Home screen menu to Settings > System > Advanced systems
settings > Network connection reset, and then select Reset connection.
When you select this option, the TV removes your wireless network information, including the
name of the connection (its SSID) and your wireless password, if any, and then it restarts. After
restarting, your TV retains all of its other settings including its association with your Roku
account.
After resetting your network connection, navigate from the Home screen menu to
Settings > Network > Set up new connection to set up your network connection and enjoy all
of the benefits of your connected TV.
Guided
Guided
123
Setup.
Setup.