Formatting Usb Flash Memory - Yamaha AVANTGRAND N2 Owner's Manual

Formatting USB Flash Memory

Certain USB flash memory devices may require formatting before they can be used by this instrument.
CAUTION
If you format a USB flash memory that already contains data, all of the data will be erased. Be careful not to
erase important data when using the format function.
1 2 2
1
Engage the Format mode.
After connecting the USB flash memory device to be formatted to the instrument,
press the [RECORD] button while holding the [FUNCTION] button.
↓
The message " " (Format) appears on the display.
For
2
Start Formatting.
After pressing the [PLAY/STOP] button, a "
Press the [+] button to execute the formatting operation. Press the [-] button to can-
cel formatting.
↓
When the formatting is finished, "
CAUTION
Do not turn off the power to the instrument or disconnect the USB flash memory device, while the instru-
ment is formatting the USB device (while "
USB flash memory itself.
3
Exit from the Format mode.
Press any one of the buttons.
1
n Y " message appears on the display.
End " appears on the display for three seconds.
--- " is displayed ). Doing so may damage the data or the
For
N3/N2
33
•
Owner's Manual