Formatting Usb Flash Memory - Yamaha PSR-S650 Owner's Manual

9. Using USB Flash Memory

Formatting USB Flash Memory

A new USB flash memory must be formatted before it
can be used by this instrument.
NOTICE
• If you format a USB flash memory that already contains
data, all of the data will be erased. Be careful not to erase
important data when using the format function.
1
Call up the FILE CONTROL display
(page 55).
2
Use the CATEGORY [<] and [>] buttons
to select "USB Format."
The display prompts you for confirmation.
3
Press the [EXECUTE] button and the dis-
play prompts you for confirmation.
You can press the [-/NO] button at this message
to cancel the operation.
4
Press the [EXECUTE] button again, or
the [+/YES] button to execute the format
operation.
NOTICE
• Once the format-in-progress message appears in the
display, the operation cannot be canceled. Never turn
off the power or remove the USB flash memory during
this operation. Doing so could result in damage to the
data.
56
Owner's Manual
5
When the operation is complete, a "Com-
pleted" message appears briefly, then
returns to the display of step 2. Press the
[EXIT] button to exit from the FILE CON-
TROL display.
NOTE
• If the USB flash memory has been write-protected, an
appropriate message will appear in the display and you
will not be able to execute the operation.