Yamaha AVANTGRAND N2 Owner's Manual page 36

Connections
r AUX IN [L/L+R] [R] jacks
The stereo outputs from another instrument can be connected to these jacks,
allowing the sound of an external instrument to be reproduced via the N3/N2's
speakers. Refer to the diagram below and use audio cables to make the connections.
CAUTION
When the instrument's AUX IN jacks are connected to an external device, first turn on the power to the
external device, then to the instrument. Reverse this order when you turn the power off.
Instrument
AUX IN
phone plug
(standard)
AUX IN
phone plug
(standard)
t AUX OUT [L/L+R] [R] jacks
These jacks let you connect the instrument to external powered speaker systems, for
playing in larger venues at higher volumes. Refer to the diagram below and use
audio cables to make the connections.
CAUTION
When the instrument's AUX OUT jacks are connected to an external audio system, first turn on the power
to the instrument, then to the external audio system. Reverse this order when you turn the power off.
Instrument
AUX OUT
phone plug
(standard)
36
• N3/N2
Owner's Manual
Tone Generator
AUX OUT
phone plug
(standard)
audio cable
OUTPUT
phone plug
(standard)
audio cable
Powered speaker
AUX IN
phone plug
(standard)
audio cable
Use only the AUX IN [L/L+R] jack for
connection with a mono device.
Use audio cables and adaptor plugs with
no resistance.
When the sound from the AUX OUT
jacks is routed to the AUX IN jacks, the
input sound will be output from the
speaker of the instrument. The output
sound may be excessively loud and may
cause noise.
Use only the AUX OUT [L/L+R] jacks for
connection with a mono device.