Activating The Musiccast Timer Function - Yamaha MusicCAST MCX-1000 Owner's Manual

4 Use / / / to move the cursor to "Use
recording timer" and press SELECT.
The Recording Timer screen appears on the on-screen display.
5 Use / / / to move the cursor to "Use
recording timer". Press SELECT to place a
check in the checkbox.
To stop using the Timer function, use
to "Use recording timer" and press SELECT to remove the
check from the checkbox.
6 Use / / / to move the cursor to the
numerical fields to the right of "Start". Use
to set the time you want the MusicCAST server
to begin recording.
7 Use / / / to move the cursor to the
numerical fields to the right of "End". Use
to set the time you want the MusicCAST server
to stop recording.
8 Use / to move the cursor to the right of the
"Input & type" label. Use
source you want the MusicCAST server to
record from.
• Optical
Select this option to record from external components
connected to the OPTICAL IN jack on the MusicCAST
server.
• Coaxial
Select this option to record from external components
connected to the COAXIAL IN jack on the MusicCAST
server.
• Analog
Select this option to recrod from external components
connected to the ANALOG IN jacks on the MusicCAST
server.
9 If you wish to use Synchro recording (see
page 29), use / to move the cursor to
"Synch. Rec" and press SELECT to place a
check in the checkbox.
Using the Timer function for playback and recording
10 Use
Activating the MusicCAST Timer
function
You must activate the Timer function separately from
setting the actual Timer details to use the Timer func-
tion for playback and recording on the MusicCAST
server. The Timer will not function if you do not activate
it, even if you set other parameters on the Timer func-
tion screens.
Carry out the following procedure to activate the Timer
function.
/ to move the cursor
1 Press TOP MENU.
/
/
/ to select the
2 Use
99
/ to move the cursor to "OK" and press
SELECT.
The Timer recording function activates and the MusicCAST
server returns to the prevous screen.
Select "Cancel" to return to the previous screen without
activating the Timer recording function.
Select "Clear" to clear the details you entered on this screen
and start again.
The Top Menu screen appears on the on-screen display.
/ to move the cursor to "Timer Setup"
and press SELECT.
The Timer Setup screen appears on the on-screen display.