Yamaha MusicCAST MCX-1000 Owner's Manual page 138

Appendix
SYMPTOM
You cannot start playback on the
MCX-A10.
There are skips or pauses during
playback from the MCX-A10.
The MusicCAST server does not
appear to find the correct album,
or finds
no albums at all, when you
attempt to store an album.
The MCX-1000 does not display
the data it obtains from the
Gracenote CDDB correctly.
The MCX-1000 does not appear
to complete MP3 encoding.
The MCX-1000 stops storing
songs prematurely.
You are unable to select some
songs for recording to the CD.
You cannot enter the CD creation
or CD storing screens after
recording from an external
device.
The MCX-1000 does not record
or playback from the analog input
jacks.
You cannot change from external
input to another playback option.
Playback changes from the
external input for no apparent
reason.
The MCX-1000 does not control
the AV receiver correctly.
CAUSE
Auto Configuration has not finished.
The network settings are incorrect.
The MCX-1000 is not turned on.
There are no songs which the
MCX-1000 has finished encoding to
MP3 format in the MCX-1000 library.
Surroundings are interfering with
wireless network signals (for wireless
connections only).
Surroundings are interfering with
wireless network signals (for wireless
connections only).
The network is extremely congested
(for wired network connections).
The MCX-1000 is set not to access the
Gracenote CDDB.
The MCX-1000 is only accessing its
internal Gracenote CDDB.
The MCX-1000 cannot access the
Internet-based Gracenote CDDB
service even though it is set to do so.
This happens occasionally when using
the Gracenote CDDB, particulary when
other languages are registered in the
database.
The MCX-1000 is distributing MP3
songs to MusicCAST clients and
playing back MP3 songs
simultaneously.
The hard disk drive is full.
The MCX-1000 is set to Synch.
Recording for signals from external
inputs.
You are attempting to select songs for
which only MP3 files exist.
The MCX-1000 is already recording
something other than the item you are
attempting to select.
The analog level is set too low.
The MusicCAST is recording from an
external input.
Another operator is changing sources.
You are using a "straight" type RS-
232C cable.
You have not set the MCX-1000 to
change AV receiver settings.
The AV receiver 6 channel input
parameter, is set to "ON".
138
REMEDY
→ Carry out the Auto Configuration
process.
→ Check the network settings.
→ Turn the MCX-1000 on.
→ Wait until MP3 encoding is
complete.
→ Try using a different wireless
network channel, or use a wired
network connection.
→ Try using a different wireless
network channel, or use a wired
network connection.
Place your MusicCAST components
under a different subnet mask.
→ Set the MCX-1000 to access the
Gracenote CDDB.
→ The built-in Gracenote CDDB
database on the MCX-1000 may not
contain data on some CDs. Set the
MCX-1000 to access the Gracenote
Gracenote CDDB via the Internet
(note: connect the MCX-1000 to the
Internet first).
→ Check the network settings.
→ Edit the text manually.
→ Stop one of these processes.
→ Delete any songs you do not need, or
delete PCM versions of songs.
→ Store songs manually.
The MusicCAST server cannot record
MP3 files to CD.
→ Stop all other recording.
→ Use the level adjustment dial on the
front panel of the MCX-1000 to set
an appropriate recording level.
→ Stop recording from an external
source.
→ Stop the operator from changing
sources.
→ Use a "cross" RS-232C cable.
→ Set The MusicCAST server to
change AV receiver settings.
→ Set the AV receiver 6 channel setting
to "OFF".
PAGE
106
108
132
108
108
119
119
57
57
29
27
28
27
91, 122