Inserting A Battery - Yamaha Pocket Recorder Owner's Manual

Starting Up

Inserting a battery

Turn the power off before you replace the bat-
tery.
Note:
· If you use an alkaline battery, press and hold down
the MENU/STOP button for at least two seconds to
access the COMMON menu, then select "ALKA-
LINE" for the BATTERY SETTING.
Battery indicator
Check the battery indicator on the LCD screen to
determine the remaining battery power.
14
POCKETRAK 2G Owner's Manual
Install one eneloop (supplied) or
AAA/LR03/HP16 alkaline battery.
: Good condition
: Weak battery
: Exhausted battery: Recharge the "eneloop"
(page 35) or replace the battery with a new
alkaline battery. If you keep using the
recorder without recharging the "eneloop"
or replacing the battery, the recorder will
display the message "LOW BATTERY PLEASE
CHARGE A BATTERY" or "LOW BATTERY."
The LCD screen will then go dark.
Hint:
For more information on recharging the "eneloop"
battery, refer to page 35 .
When you turn on the power to the recorder for the
first time after purchase, set the date and time. To do
so, press and hold down the MENU/STOP button for at
least two seconds to access the COMMON menu, then
use the DATE & TIME settings.
Note:
· Dispose of all used batteries safely in accordance
with all applicable laws.