Advertisement
Available languages
Available languages
TRIP SAFETY SWITCH BEFORE OPERATING
BURNER MAINTENANCE
!
CAUTION
To avoid electrical shock, turn off the power at the
system switch or the circuit breaker before servic-
ing the control system, burner motor, oil valve, or
ignition. Tripping the safety switch shuts down
the burner but does not disconnect the power
supply.
To trip the safety switch, move the safety switch lever
down until the red reset button pops out, see Fig. 5. The
burner will not operate until the safety switch is reset by
pushing in the red reset button.
Home and Building Control
Honeywell Inc.
1985 Douglas Drive North
Golden Valley, Minnesota 55422
Home and Building Control
Honeywell Limited—Honeywell Limitée
740 Ellesmere Road
Scarborough, Ontario
M1P 2V9
Fig. 5—Tripping and resetting safety switch.
PUSH LEVER DOWN TO
TRIP SAFETY SWITCH
Helping You Control Your World
WHEN SAFETY SWITCH TRIPS,
RESET BUTTON POPS OUT
M1580A
QUALITY IS KEY
Advertisement
