Harken LOUP S 3139 Instructions

3139, 3140, 3141, 3142, 3143, 3144, 3145, 3146, 3147, 3148, 3149, 3150, 3202, 3203, 3151 (Dogbone)
WARNING! Strictly follow all instructions to avoid an accident, damage to your vessel,
personal injury or death. See www.harken.com/manuals for additional safety information.
Loups offer a variety of ready-made soft attachment rigging solutions for racing and cruising yachts. When fitting hardware, choose the Loup
®
matches the attachment method and strength shown in the chart below. Custom length Loups are also available. If you have questions, please contact Harken.
Loup strength will vary depending on: Configuration – One configuration may be more than twice as strong as another. Carefully match strength requirements to the
configuration and corresponding SWL shown in the chart below. Attachment Points – Determine weakest link in the attachment chain. Is it the block? The Loup? The
padeye? Consult chart below for padeye loading at various angles. Condition of Attachment – Loup must attach to round bails or radiused corners. Sharp, rough edges
or corners will cut into Loups, reducing their strength over time. Age of Loup – Strength of Loup is based on their being in like new condition. See chart below.
Loup
®
Part Length
No. in mm
5mm — ONE YELLOW, TWO ROWS OF DARK-COLORED TRACERS
3202 8 203
7mm — ONE YELLOW, FOUR ROWS OF DARK-COLORED TRACERS
3203 10 254
9mm — TWO (2) ROWS OF COLORED TRACERS
3139 4 100
3140 8 200
3140 11 280
10mm — THREE (3) ROWS OF COLORED TRACERS
3142 5 125
3143 9 230
3144
15 380
11mm — FOUR (4) ROWS OF COLORED TRACERS
3145 5 125
3146 9 230
3147 16 400
12mm — FIVE (5) ROWS OF COLORED TRACERS
3148 6 150
3149 11 280
3150 17 430
MWL
MWL: Maximum Working
Even when bail is aligned with load, padeye strength will vary depending on load angle—see below.
Part
No. Description
627 Small round
629 Large round
648 High-load medium
689
Large diamond
I N S T R U C T I O N S
N15W24983 Bluemound Rd., Pewaukee, WI 53072-4974 USA
Tel: 262-691-3320, Fax: 262-701-5780 • Web: www.harken.com, Email: harken@harken.com
Maximum Working Load (MWL)
Vertical Choker
lb kg lb
1275 578 1000 453
2550 1155 2040 920
2800 1270 2240 1015
2800 1270 2240 1015
2800 1270 2240 1015
4200 1900 3360 1520
4200 1900 3360 1520
4200 1900 3360 1520
5700 2585 4560 2065
5700 2585 4560 2065
5700 2585 4560 2065
7150 3240 5680 2575
7150 3240 5680 2575
7150 3240 5680 2575
Harken
MWL
Load
Maximum Working Load (MWL)
1
lb kg
5000 2270
20000 9070
11800 5358
8500 3855
L O U P S
®
Loup Strength
®
With Dogbone
kg lb kg lb
— — 2550
5100
— —
— — 5600
— — 5600
— — 5600
— — 8400
— — 8400
5645 2560 8400
— — 11400
— — 11400
— — 11400
— — 14200
— — 14200
— — 14200
Padeye Strength
®
WARNING! Load applied sideways to the bail greatly
reduces the strength. Always align padeye bail to load
for maximum strength to prevent breakage below
Maximum Working Load.
2
lb kg
4500 2040
12000 5440
10375 4705
8000 3628
= Incorrect. Avoid to prevent accidents.
Basket
kg
1156
2310
2540
2540
2540
Vertical
3810
3810
3810
5170
5170
5170
6440
With Dogbone
6440
6440
Load
3
Angle
lb kg
4300 1950
14000 6350
8500 3855
7800 3540
that exactly
®
Choker
Basket
1
2
3