Niko 350-20057 Manual page 22

350-20057
Cut off: Cuts off 230 V to zones 1/2 due to lux level.
Explanation fig. 1:
1: White buttons – used by the user on a daily basis.
2: Grey buttons – only used upon first startup
3: Red buttons – only used upon startup, for setting Lux in zone 1.
4: Orange buttons – only used upon startup, for setting Lux in
zone 2 (factor of Lux zone 1).
5: Blue buttons – only used upon startup, for setting cut-off time
for movement sensor.
Factory settings, 350-20056:
Sensitivity: High sensitivity
Application: App. 1
Lux: 100 lux
Time: 10 mins
LED movement indication: Off can only be changed via the remote
control.
DIP switch setting, 350-20056:
0 = Off and 1 = On
Sensitivity on DIP 1 and 2:
DIP setting: .........................Sensitivity:
0 0 ............................Minimum sensitivity
0 1 ............................Low sensitivity
1 0 ............................High sensitivity (Default)
1 1 ............................Maximum sensitivity
22 EN