Niko 350-20057 Manual page 20

350-20057
If the LED is off and the button is pressed, the green LED will flash
and the red LED will come on for 2 seconds.
If the LED is on and the button is pressed, the green LED will flash
for 2 seconds.
Lux Zone 1:
Setting the lux level. There are six preset settings: 30/100/300/600/
1000 and 2000 as well as user-defined lux value (Learn actual
lux). The user-defined lux value works in the 5–2000 lux range.
When the Learn actual lux button is pressed, the green LED
flashes for 10 seconds as an indication that the lux level is being
loaded. Then the green LED comes on and the connected lighting
is turned on for 5 seconds.
If the lux level is outside the 5-2000 lux range, this is indicated by
the green LED flashing quickly. It will continue to do this until one
of the preset settings is selected.
This setting should be used when the desired minimum lighting
in the room has been reached (the time when the light will be
switched on due to insufficient daylight in the room).
Lux Zone 2:
Not used in connection with PIR model 350-20056.
Time:
Setting the cut-out time. There are six preset settings: 2/5/10/15
and 30 minutes as well as Pulse (5 seconds On / 60 seconds Off).
Time 1/Time 2/Time 3 are not used for this product.
Test On/Off:
Activating walk test.
20 EN