TP-Link TL-SG108E Installation Manual

Installation Guide
5/8/16-Port Gigabit Easy Smart Switch
Note: For simplicity, we will take TL-SG108E for example throughout this Guide.
Connection
Internet
Configuration
The switch is plug and play. To configure the switch, you can use the
Web-based GUI or the configuration utility.
The utility is only supported on Windows now.
Using the Web-based GUI
1. Find out the IP address of the switch.
By default, the switch receives an IP addess from a DHCP server (or a
router that functions as a DHCP server) in your network. You can find
out this IP address on the DHCP server.
If the switch cannot receive an IP address from a DHCP server, it uses
the static IP address of 192.168.0.1, with a subnet mask of
255.255.255.0.
2. Configure IP address on your PC to make sure the switch and PC are in
the same subnet.
If the switch uses an IP address assigned by a DHCP server, set your PC
to obtain an IP address automatically from the DHCP server.
If the switch uses 192.168.0.1
address as 192.168.0.x
255.255.255.0.
3. Launch a web browser on your PC, enter the IP address of the switch in
the address bar and press Enter. Log in with admin as both user name
and password.
Now you can configure the switch using the Web-based GUI. For further
information, refer to the User
Go to https://www.tp-link.com/support, search the model number of your
switch, and you can find this guide on the product
Note: If the switch gets a new IP address from the DHCP server, your
connection to the switch will be lost. Enter the new IP address in your
browser to access the switch again.
Router
WAN Port LAN Port
as the IP address, configure your PC's IP
("x" ranges from 2 to 254), and subnet mask as
Guide.
Support web page.
LED Explanation
Power
On:
Off:
Link/Act
1000 Mbps (Green)
On:
Flashing:
10/100 Mbps (Yellow)
On:
Flashing:
TL-SG108E
PC
Using the Configuration Utility
1. Go to https://www.tp-link.com/support and search the model number of
your switch. Download the Easy Smart Configuration Utility
product Support web page on your PC.
2. Decompress the downloaded file, run the
installation wizard and follow the prompts to
install the Easy Smart Configuration
3. Double click the icon on the desktop, and the
utility Home page will display a list of TP-Link
switches on the local network.
4. Click to find out IP parameters of the switch.
If the switch uses an IP address assigned by
a DHCP server, set your PC to obtain an IP
address automatically from the DHCP
server.
If the switch uses 192.168.0.1
address, configure your PC's IP address as
192.168.0.x ("x" ranges from 2 to 254), and
subnet mask as 255.255.255.0.
5. Double click the switch that you want to configure. Log in with admin as
both user name and password.
Now you can configure the switch using the configuration utility. For further
information, refer to the Easy Smart Configuration Utility User
Go to https://www.tp-link.com/support, search the model number of your
switch, and you can find this guide on the product
Power on
Power off
Running at 1000 Mbps
Transmitting/receiving data
Running at 10/100 Mbps
Transmitting/receiving data
Ethernet Ports (1-8)
PC
Utility.
as the IP
Guide.
Support web page.
from the