Yamaha pdm-4210 User Manual page 39

OPERATING INSTRUCTIONS (continued)
PICTURE MENU (continued)
Selected characters
Picture Mode
Narrows the gap between
Contrast
brightness and darkness.
Black is subdued for
Brightness
increased overall darkness.
Color
Darkens colors.
Sharpness
Soft
Enhances red and weakens
Tint
green.
Cool
Color Temperature
Contrast Mode
Reset
YNR
CNR
Film Mode
PAL Comb Filter
LTI
CTI
Black Enhancement
Auto Color
Color Temp. Adjustment
Brighter scenes are
Red
decreased in reddish color.
Brighter scenes are
Amplitude Green
decreased in greenish color.
Brighter scenes are
Blue
decreased in bluish color.
Dark scenes are decreased in
Red
reddish color.
Dark scenes are decreased in
Green
Cut Off
greenish color.
Dark scenes are decreased in
Blue
bluish color.
Day Night
Broadens the gap between
brightness and darkness.
Black is set off for increased
overall brightness.
Lightens colors.
Sharp
Enhances green and weakens
red.
Normal Warm Black / White
Normal Auto Dynamic
(Selects the Reset mode)
Off Low High
Off On
Off On
Off Low Middle High
Off On
Off On
Brighter scenes are increased
in reddish color.
Brighter scenes are increased
in greenish color.
Brighter scenes are increased
in bluish color.
Dark scenes are increased in
reddish color.
Dark scenes are increased in
greenish color.
Dark scenes are increased in
bluish color.
Setup hint
Day: This setting is best for very bright ambient lighting.
Night: This setting is for normal lighting conditions.
Adjust for maximum visibility to suit the ambient brightness.
This can be adjusted further till [+40] by pressing and holding
cursor button at [+31]. The color for [+32] to [+40] numbers will
change from white to magenta. This special mode is better for dark
scenes.
For normal viewing we recommend that the Contrast is set to [+31].
"Panel Life" in the Function Menu should be set to Normal when this
Contrast setting is adjusted.
Adjust to taste.
Adjust to taste.
Normally set to Centre position. Shift to the minus (-) side for a softer
effect and plus (+) for a sharper picture.
This is adjustable when receiving PAL/SECAM signal.
Then the character will be grayed out.
Adjust for most realistic skin color.
Normally set to Cool.
Dynamic:Emphasizes the differences between video shadings to
improve the feeling of contrast.
Normal : The gradation of an image is reproduced as faithfully as
possible.
Auto:Detects image brightness and automatically adjusts for natural
brightness.
The original factory settings for the items of this Menu page can be
restored by pressing the OK button.
Performs picture signal noise reduction. Turn up to reduce noise.
Performs color signal noise ßreduction. Turn up to reduce noise.
It will be fixed as Off only when selecting DVI-STB mode.
On:Automatically detects the movie film material and faithfully
reproduces the original film image.
Off:Set to OFF when switching between images does not appear
natural.
This is available only when receiving a PAL composite signal. Turn On
to reduce the discolorations in fine picture detail and provide purer
color.
Adjusts the sharpness of the picture signal.
Adjusts the sharpness of the color signal.
Adjusts the black level compensation.
This is available only when receiving an NTSC composite/S.Video
signal. This monitors and adjusts the color to maintain constant color
levels. It also maintains natural flesh tones while preserving fidelity of
background colors.
Turn On when you wish to change color temperature depending on
the user's preference.
Adjust color temperature depending on the user's preference. These
settings are independently stored in each of the 4 Color Temperature
modes.
37