Yamaha USB-MIDI INTERFACE UX16 Owner's Manual page 14

Selecting the destination for the MIDI signal output
This section explains how to set up the UX16 for use with Windows Media Player
(included in Windows) or an equivalent program. For information on setting up
your sequence software, refer to the owner's manual for the software.
Windows Me
1. Select [My Computer | Control Panel] and double-click to open "Sounds and
Multimedia (Multimedia)."
For Windows Me users, if you do not see "Sounds and Multimedia" in the "Control
NOTE
Panel," click "View all Control Panel options."
2. Click the "Audio (MIDI)" tab.
3. Click "Preferred device" in "MIDI Music Playback" and select "YAMAHA USB
OUT xx-1." For Windows Me users, check the "Use only preferred devices"
checkbox.
The variable "xx" represents the device number
NOTE
connected, the device number is "0."
For Windows 98 users, select the driver while "Single instrument" is selected.
NOTE
If "YAMAHA USB OUT xx-1" is not displayed, the drive has not been installed
NOTE
correctly. Delete the driver
4. Click [OK].
Windows 98
(page
(page 27) and re-install the driver.
14
22). If only one UX16 is