Connections - Yamaha USB-MIDI INTERFACE UX16 Owner's Manual

Connections

This section explains how to use the UX16 to connect your MIDI devices (tone
generator or keyboard, etc.) to your computer.
Computer
See page 9 for information
on installing the driver.
1. Connections to your computer
Connect the USB cable to the USB terminal of your computer (or USB hub). It
is not necessary to turn off the power of your computer before doing so.
2. Connections to MIDI devices
Turn off the power of your MIDI devices before connecting them. Connect the
MIDI OUT cable of the UX16 to the MIDI IN terminal of your MIDI device, and
connect the MIDI IN cable to the MIDI OUT terminal of your MIDI device. Set
the HOST SELECT switch of your MIDI device to "MIDI."
MIDI device
8
Set the HOST SELECT
switch of the MIDI
device to "MIDI."