Chapter 1 - System Configuration; Computer; Software - Yamaha CRW4260t-B User Manual

Chapter 1 - System Configuration
Before using the CRW4260t, make sure that you have all of the items
on the list of included items.
In order to use the CRW4260t, you will require the following.

Computer

The following operating environment is required:
•
•
•
•
•
Note: You will need about twice as much space on your hard disk as that
required by the data you wish to write to CD-ROM.
SCSI card
This is required in order to connect a SCSI device (the Yamaha
CRW4260t) to your computer.
We recommend the following:
Adaptec SCSI cards: AHA-2940 (PCI), AHA-284x (VL), AHA-2740
(EISA), AHA-154x (ISA), etc.

Software

Use writing software or packet writing software which supports the
CRW4260t.
An IBM/AT compatible computer with a 100 MHz or faster Pentium
CPU (in order to write at 4x speed), or a 100 MHz or faster 486
CPU (in order to write at 2x speed)
A vacant slot in which to install a SCSI card or a pre-installed
SCSI card
A vacant half-height bay
Windows 3.1, Windows 95, Windows NT4.0 or Higher
Sufficient hard disk space

Chapter 1 - System Configuration

3