Table of Contents
Advertisement
4. FIREWIRE MODEL HARDWARE INSTALLATION
4.1. Setup Flowchart for CRW2100FXZ (FireWire IEEE1394)
This flowchart shows the procedure for setting up your new Yamaha 3-in-1 FireWire IEEE
1394 drive. For easy cross-referencing, the relevant pages in this manual are also provided.
Before beginning the installation process, find out if you have an appropriate IEEE 1394
(FireWire or i.Link) interface card or a built-inFireWire port in your PC (see page 22).
Windows Users
Make sure that system
STEP
configuration (CPU, RAM, OS and
1
so on) of your computer meets
the requirements of the
CRW2200FXZ drive
STEP
Does your computer have a
2
built-in IEEE1394 port?
STEP
Install the CD writing software.
4
Note:
Before installing the software,
disconnect all IEEE1394 devices.
STEP
Set up the CRW2200FXZ drive
5
1. Turn your computer and the drive
both on (before connection).
2. Connect your computer and the
drive using an IEEE1394 interface
cable that came with the drive.
Note:
You may need a different cable
depending on the IEEE1394 port
connector on your computer (P. 28).
STEP
Make sure that the CRW2200FXZ
6
drive is correctly recognized
Start using the CRW2200FXZ drive.
STEP
7
Use the drive to create an audio CD, to
backup data on your hard drive, or for
whatever purpose suits your needs.
(Pgs 2-3).
Yes
(P. 25-30)
(P. 31).
STEP
Do you have an appropriate
3
IEEE1394 interface card?
The card should be known
No
compatible with your computer.
STEP
Install the card in
3-2
your computer.
Read the documentation that
came with the card and properly
set up your computer.
.
STEP
Purchase an IEEE1394 card.
3-1
Note:
20
IBM Compatible or
Macintosh Computers
Yes
See page 23 for more information
about approved IEEE1394
interface cards that has been
tested in compatibility with the
CRW2200FXZ drive.
No
Advertisement
Table of Contents
