HOW TO CHANGE THE DATE &TIME ON A SAMSUNG PHONE
1.
From any Samsung phone press the transfer button then dial 200 (This feature
may not work on a 8 button phone)
2.
Enter the pass code 1234.
3.
Press 1 to enable customer programming.
4.
Press the speaker button and you should see CUS. PASSCODE on your screen.
5.
Dial 505 and you will see the old date on the top of your screen and the new date
waiting to be entered on the bottom of your screen. Generally you will only have
to change the time which are the last 4 (HHMM).
ex. OLD:2/05/21/02:1300
New: wmmddyy: hhmm
6.
Using the dial pad enter the same digits from old until you get to HHMM (hours
minutes). Enter the new time (using the 24 hour clock) then press transfer.
7.
Clock should now be ok.
HOW TO IMPUT SYSTEM AND PERSONAL SPEED DIALS AND
NAMES
1.
From any Samsung Phone press the TRANSFER button and dial 200.
2.
Enter pass code 1234.
3.
Press 1 to enable customer programming.
4.
Press the SPEAKER button and you should see CUS PASSCODE on the screen.
Dial 705 for the SYSTEM speed dial (which starts at 500) and dial 105 for the
STATION speed dial (which starts at 00). Use the volume arrow up to find a blank spot
(ex: 500 or 00). When you find the spot, dial the phone number. You must enter a trunk
code. In most cases it is a 9 dialed before the phone number - this grabs you an outside
line in the dialing string. You then enter the phone number that you are trying to program.
The area code needs to be entered for local calls and 1 + area code for long distance calls.
5.
To input the name after you program the number you will press the SPEAKER
button which will take you to the naming the speed dial, regardless whether you are
programming station or system speed dials. You must enter the location number that you
just programmed ex: 500 or 00 and use the keypad to enter the name (ex: For 'A' you
press 2 once and for 'C' you would press 2 three times).
6.
You use the volume keys to go forward or backward, if you make a mistake,
pressing the HOLD button will erase the whole line and you will have to start that line
again.
7.
It is usually easier to input all the speed dials in the system speed dial bin. The
only problem with this is any "secret numbers" can be seen by anyone using the "DIR" or
directory button.
8.
Press the TRANSFER button to save and exit.
SYSTEM