Safety Notes - Westfalia Wetekom JLT-01 Instruction Manual

Please note the following safety notes to avoid malfunctions,
damage or physical injury:
Make sure the voltage corresponds to the type label on the unit.
Please read this manual carefully and use the unit only according to this
manual.
Persons with limited physical, sensorial or mental abilities are not allowed
to use the unit, unless they are supervised for their safety by a qualified
person or are briefed by the responsible person how to use the unit.
Do not leave the unit unattended while it is turned on. Keep children away
from the unit while it is in operation. Do not allow children or other persons
in need of supervision to operate the unit.
Place the unit on a level, solid surface during operation. Do not use the unit
outdoors.
Do not touch any hot surfaces. The soldering tip becomes very hot during
operation.
Be very careful when using the soldering iron around combustible
materials. During soldering harmful fumes may escape. Work only in well
aired spaces or under a suitable air extraction system.
Protect your eyes and body from splashing hot solder by wearing suitable
protective equipment.
Turn off the unit and pull the power plug while you are not using the unit or
before cleaning. Do not pull on the power cord, always grasp the plug itself.
Do not touch the power plug with wet hands.
Allow the unit to cool down before cleaning or storing.
Do not run the power cord around sharp edges or over hot surfaces.
Do not immerse the unit in liquids of any kind. Do not use the unit to heat
plastic or liquids.
Do not disassemble the unit and do not try to repair it yourself. It does not
contain parts serviceable by you. Have the unit repaired by a professional

Safety Notes

8