Vecow MTC-7000 Series User Manual page 55

4.4.1.2 Graphics Configuration
Figure 4-4-1-2 : Graphics Settings
Internal Graphics
Keep IGFX enabled based on the setup options.
GTT Size
Select the GTT size.
Aperture Size
Select the aperture size.
Note : Above 4GB MMIO BIOS assignment is automatically enabled when selecting 2048MB aperture. To use this
feature, please disable CSM support.
DVMT Pre-Allocated
Select DVMT 5.0 pre-allocated (fixed) graphics memory size used by the
internal graphics device.
DVMT Total Gfx Mem
Select DVMT 5.0 total graphic memory size used by the internal graphics device.
4.4.2 PCH-IO Configuration
Figure 4-4-2 : PCH-IO Settings
PCH LAN Controller
Enable or disable onboard NIC.
Wake on LAN
Enable or disable integrated LAN to wake the system. (The Wake On LAN
cannot be disabled if ME is on at Sx state.).
Serial IRQ Mode
Configure Serial IRQ Mode.
State After G3
Specify what state to go to when power is re-applied after a power failure (G3 state).
©Vecow MTC-7000 User Manual BIOS SETUP 48