Vecow MTC-7000 Series User Manual page 23

2.2.3 LAN Connector
There are dual 8-pin RJ-45 jacks supporting 10/100/1000 Mbps Ethernet
connections in the front side. LAN 1 is powered by Intel
is powered by Intel
status, iAMT function is enabled. Using suitable RJ-45 cable, you can connect
the system to a computer, or to any other devices with Ethernet connection, for
example, a hub or a switch. Moreover, both of LANs support Wake on LAN and
Pre-boot functions.
LED Location LED Color
Right
Left
2.2.4 USB 3.1 Connector
There are 4 USB 3.1 connections available supporting up to 10GB per second
data rate on MTC-7000 series panel pc. It also compliant with the requirements
of Super Speed (SS), high speed (HS), full speed (FS) and low speed (LS).
2.2.5 DVI-D Connector
The DVI output mode supports up to 1920 x 1080 resolution. The DVI is
automatically selected according to the display device connected. You will need
a DVI-D cable when connecting to a display device.
©Vecow MTC-7000 User Manual
COM 1
DP DVI-D
COM 2
®
I210 Ethernet engine. When both of LANs work in normal
10Mbps
Green/
Off
Orange
Twinkling
Green
Green
COM 1
DP DVI-D
COM 2
COM 1
DP DVI-D
COM 2
USB3.1 USB3.1 LAN 1 LAN 2
®
i219 Ethernet Phy; LAN 2
100Mbps 1000Mbps
Solid Solid
Green Orange
Twinkling Twinkling
Green Green
USB3.1 USB3.1 LAN 1 LAN 2
USB3.1 USB3.1 LAN 1 LAN 2
GETTING TO KNOW YOUR MTC-7000
DC-IN 9V~48V
1 8
DC-IN 9V~48V
DC-IN 9V~48V
16