Handling - TAVRIDA ELECTRIC VCB Series User Manual

Figure 56
CBmount_CM_1 package labeling
Figure 57
CBmount_CM_1 delivery set

3.4 Handling

To avoid equipment damage follow the handling recommendations listed below:
1. handling in accordance with pictorial symbols;
2. elimination of drops from any heights;
3. elimination of any mechanical impacts which can cause damage of the package;
4. the boxes are to be stowed to ensure complete tightness. The boxes should be hitched and lashed tightly
so that it could not shift inside of a container under any conditions of carriage;
5. the modules shall be tied up with 16 mm polyester band twice. Top edges of the boxes shall be protected
with plastic corners. The boxes can be additionally wrapped with stretch film.
36
1. Manufacturer
2. Type of device
3. Product name
4. Product code
1. Holder
CBunit_Holder_15
2. Washer
StandDet_Washer_DIN127-A(4_Fe-Zn)
3. Screw
StandDet_Screw_DIN7985-Ph(M4_12_Fe48-Zn)
4. Washer
StandDet_Washer_DIN125-1A(4.3_Fe-Zn)
5. Screw
StandDet_Screw_ISO7046-Ph(M4_6_Fe48-Zn)
6. Holder
StandComp_Holder_DIN(1)