Table of Contents
Advertisement
Physical Details
Front Panel:
Operation of the Front Panel LEDs is as follows:
System:
Power
OFF - No Power.
ON - Normal Operation
Status
OFF - Normal Operation
ON - Firmware not loaded or Hardware Error
Blinking - Data in/out
WAN:
LINK/ACT
ON - Physical connection to the Broadband modem on WAN port 1/2 established.
OFF - No physical connection on WAN port 1/2.
10M/100M
ON - Physical connection using 100BaseT on WAN port 1/2 established.
OFF - 10BaseT connection or no connection on WAN port 1/2.
LAN:
LINK/ACT
ON - Physical connection or data in/out.
OFF - No physical connection.
10M/100M
ON - The corresponding LAN port is using 100BaseT.
OFF - 10BaseT connection on the corresponding LAN port or no connection.
7
Advertisement
Table of Contents
