Basic Setup; Xc-Dpg503; Connecting Broadband Modems; Twin Wan Vpn Gateway - XiNCOM Twin WAN XC-DPG503 User Manual

XC-DPG503

Twin WAN VPN Gateway

Chapter Contents
• Overview
• Procedure
1. Configuring your LAN

2. Connecting Broadband Modems

3. Configuring for Internet Access
4. Configuring your LAN PCs
Chapter 2 - Basic Setup
Overview
Basic setup of your XC-DPG503 wil involve the following steps:
1. Connect the XC-DPG503 to one (1) PC and configure it to your existing LAN.
2. Connecting one or two Broadband Modems to your XC-DPG503.
3. Configuring the XC-DPG503 for Interent Access.
4. Configuring all PCs on your LAN to use the XC-DPG503.
Requirements:
• One or two Broadband modems (T1, xDSL, Cable, and Satillite) with an active account from your ISP(s).
• Two standard 10/100BaseT network (UTP) cables with RJ-45 connectors.
• TCP/IP network protocol must be installed on all PCs.
CAT5 Ethernet Cables Broadband Modems
TCP/IP Enabled PCs
9