Change The Batteries In The Wireless Operating Unit - Gira Alarm Connect Operating Instructions Manual

Change the batteries in the wireless operating unit

WARNING
Explosion hazard in case of improper handling of batteries.
Do not throw batteries into the fire, and do not recharge batteries, as this may
result in a risk of explosion.
Replacing the battery
Replace the battery as soon as the "low battery" display appears in the display
of the wireless operating unit. Always change out all four batteries. Mixing new
and used batteries is not permitted, as this can lead to functional damage to the
wireless control unit.
"Low battery" display
As soon as the wireless operating unit or another device reports "low battery"
status, this is shown in the Display of the wireless operating unit (the
appears and the
page shows which device is showing "low battery". Use the key
further messages.
1. The wireless operating unit reports "low battery". Detach the wireless
operating unit from the mounting frame using the unlocking tool (included
with the alarm control unit Connect). The tamper alarm is triggered.
2. Open the lid to the battery compartment and remove all batteries.
button glows yellow). Press the
Replacing the battery
button: the information
to check for
symbol
21